Fire protection system maintenance involves a range of essential services to ensure that fire safety equipment and systems remain fully operational and compliant with fire codes and regulations. Here are the main services:

1. Inspection of Fire Alarms

• Control Panels: Testing and inspecting the functionality of the fire alarm control panel to ensure proper signaling and response.
• Alarm Devices: Checking the condition of alarm bells, horns, strobe lights, and other alert devices.
• Smoke and Heat Detectors: Ensuring detectors are operational and free from obstructions or damage.

2. Sprinkler System Maintenance

• Visual Inspection: Checking the sprinkler heads for corrosion, leaks, and proper orientation.
• Flow Tests: Performing water flow tests to verify the pressure and operation of sprinkler systems.
• Valve Inspection: Ensuring control valves are in the proper position (usually open) and operational.
• Backflow Prevention Devices: Testing backflow preventers to ensure that they are functional and prevent water contamination.

3. Fire Extinguisher Inspection

• Visual Checks: Inspecting the condition, pressure gauge, and accessibility of fire extinguishers.
• Hydrostatic Testing: Periodically testing the extinguisher's cylinder to ensure it can hold pressure without leaks.
• Recharge or Replacement: Refilling used or low-pressure extinguishers and replacing outdated or damaged units.

4. Fire Suppression Systems Maintenance

• Clean Agent Systems: Checking and testing suppression systems (e.g., FM200, CO2, Halon) for proper agent levels and discharge mechanisms.
• Kitchen Hood Systems: Inspecting and cleaning kitchen fire suppression systems, nozzles, and agent tanks for grease or obstructions.
• System Alarms and Controls: Ensuring that the automatic and manual activation mechanisms are functioning properly.

5. Hydrant and Standpipe Testing

• Hydrant Inspection: Inspecting fire hydrants for visibility, accessibility, leaks, and flow.
• Standpipe and Hose Systems: Testing standpipes and hoses for proper pressure and ensuring they are free from leaks or wear.

6. Emergency and Exit Lighting

• Battery and Bulb Checks: Testing emergency lights and exit signs to ensure they work during power outages.
• Functionality Test: Confirming that lights illuminate properly and clearly mark exit routes.

7. Fire Pump Testing

• Flow Testing: Ensuring that the fire pump provides adequate water flow and pressure in case of a fire.
• Controller Inspection: Checking fire pump controllers and ensuring proper operation during testing.
• Battery and Fuel Check (for Diesel Pumps): Testing batteries and fuel systems for diesel-driven fire pumps to ensure they're operational.

8. Inspection of Fire Doors

• Hinges, Latches, and Seals: Ensuring fire doors close and latch properly, and that seals are intact.
• Clearance and Alignment: Checking door alignment, gaps, and clearance for proper functionality.

9. Fire Damper and Smoke Control Systems

• Testing Dampers: Ensuring that fire dampers close properly in response to smoke or heat detection.
• Airflow Verification: Checking smoke control systems to ensure proper airflow regulation and smoke containment.

10. System Documentation and Record Keeping

• Maintenance Logs: Keeping detailed records of inspections, repairs, and tests conducted on all fire protection systems.
• Compliance with Local Codes: Ensuring all systems meet the latest fire safety regulations and standards.

11. Training and Drills

• Fire Drills: Conducting regular fire evacuation drills to ensure occupants are aware of evacuation procedures.
• System Familiarization: Providing training on how to operate fire protection equipment, such as fire extinguishers and manual alarm stations.

12. Battery Backup System Maintenance

• Battery Testing: Ensuring the backup battery systems for alarms, control panels, and emergency lighting are functional.

Regular fire protection system maintenance ensures the safety of occupants, prevents equipment failure, and maintains compliance with fire codes and regulations.